SF-360 and SF-361P replace the motherboard after treatment
Notes:
Customer abuse or misuse, country set to make changes. This will cause the machine does not recognize the M45 cartridges.
M45 cartridge not recognized by the process:
1, maintenance engineers receive user to ink cartridge cannot be recognized fault warranty, you must first confirm the State of the machine settings.
Make sure the State is set to: "China, the code is 35"
2, in order to distinguish between a supply issue or a problem:
Recommend the use of original quality supplies to replace test, you want to get rid of is supplies problem
1): If you are using renewable or alternative supplies lead to product failure, in accordance with the warranty pay for maintenance;
2): if it is a genuine consumables, do have a problem, please send to the consumable replacement Center for testing. In compliance with standard
The premise can be replaced.
3, if supplies are not the problem, then please confirm the product's fault.
Related components are: Beacon back, boards, tracing cables (between beacon and the Board Flat Cable)
4, if you are replacing a motherboard replacement is complete, be sure to check the country setting;
5, set the State is as follows
1) press "menu #1934" enter factory mode, and then press the "menu" key to select "Memory Clear" project "OK".
2) show "COUNTRY CODE:35", you are correct. If not, then the country code of the machine settings,
Need to change country code settings;
3) if countries are to set an error, press the number keys to enter "35", press "OK", LCD displays "MEMORY CLEARING..."
Carry out survival.
4) change country to end, to once again mount cartridges tested, if there is a problem as 3~5 above steps again.
SF-360, SF-361P series used M45 cartridge, you cannot use the M40 replacement.
SF-360, SF-361P series