Screen reference debugging method is as follows:
1, enter the factory menu in the main menu in the TV mode, the volume is reduced to 3, according to the remote control mute button 0 seconds after the press AV/TV button to enter the factory settings menu. Show as follows:
M
LPC15-MXX-V1.03-WX
05/08/07
INDEX:
M says entered the factory pattern, index: O behind digital said index number of the current regulation, in the page by V+/V- switching to different index number, each regulation project are only cable quotation marks and the corresponding, the operator can P+/P- choose different regulation project, through "V+/V-" to adjust the parameters of the project.
2, screen parameter selection method
O INDEX: by pressing the remote control of the P+/P- key to the corresponding channel switch, V+/V- button to switch the index to switch
A, through the "V+/V-" button to choose the index number 2 "
B, through the "P+/P-" select to "SEL PANEL" project C, through the "V+/V-" select the screen as:
Samsung 32 SM-LV320B1 for TYPE "
LG 32 LG-LV320B1 for TYPE "
After the remote control shutdown and restart data is saved